Description
**CURRENT LEAD TIMES ARE 3-4 MONTHS ON THIS BUILD**
Looking for a high quality Ford FE Long Block, Ford 416 Long Block, or 416 FE Ford? Look no further than ours! Our Ford 416 Long Blocks are designed with quality in mind, and include features that will provide you with an engine you can be proud of.
Our team specializes in the customization of high-quality Ford Fe crate engines with the ultimate features & the highest quality materials. Whether it is a turn key FE engine, long block FE or short block FE, our Ford Fe Crate engines include moly rings, double roller timing chains, hardened pushrods, roller camshafts & so much more. Experience the ultimate in customer service that includes visual updates with pictures taken of the entire building process to ensure you stay up-to-date during the creation of your ideal Ford Fe crate engine, guaranteed to be one a kind. Explore our custom Ford Fe Crate engines Below before getting started on your own custom build.
Please check out an article written in Engine Builder Magazine with one of our 390FE’s that we built for a customer. https://www.enginebuildermag.com/2019/10/eotw-390-cid-ford-fe-engine/
The Ford 416 Long Block includes:
- Advertised power- 475hp / 525tq
- Reman 390 FE Block (this may be either a early or late style. We provide adapters to work in any year car / truck)
- 4 coats of high quality ceramic engine paint. We have our engines professionally sprayed with a 2 part paint just like you would use on a car but a special high temp version. This is not a cheap “rattle can” paint job that will wear off. This is a show quality paint job! (Premium and Ultimate only)
- Scat / Eagle FE crankshaft and rods
- Forged pistons (Premium and Ultimate only)
- Performance bearings (Premium and Ultimate only)
- Plasma Moly rings (Premium and Ultimate only)
- Hydraulic roller camshaft
- Tie bar hydraulic roller lifters
- Hardened pushrods
- Wolverine Engines Billet Roller Rocker Arms
- Roller timing chain
- Edelbrock Performer RPM FE 390-428 Cobra Jet Aluminum Cylinder Head
- Edelbrock Performer Aluminum Intake Manifold
- Computerized balance (Premium and Ultimate only)
- Built in house
- 1 Year Warranty (2 with Ultimate)
- All clearances set and provided on build sheet (Premium and Ultimate only)
- Compression Ratio- 10:1
- Can use stock converter but does better with a 1800-2200 stall converter
- Requires 91 octane gas
- No core charge (we do offer a core buy back program)
- (shown with options)
- *****Please note this engine requires an external balanced flywheel and is only available in the larger 184 tooth count*****
| Engine Build Levels | Basic | Premium | Ultimate |
| Engine Build Sheet | No | Standard | Advanced |
| Professional Ceramic Engine Paint | No | Yes | Yes |
| Computerized Engine Balanced | Stroker Kits Only | Yes | Yes |
| Block Oiling Mods | No | Yes | Yes |
| ARP Rod Bolts | No | No | Yes |
| ARP Main Studs | No | No | Yes |
| Rod + Main Bearings | OE Quality | Performance | High Performance |
| Forged Pistons | No | No | Yes |
| Camshaft | Hyd Roller | Hyd Roller | Custom Roller |
| Timing Chain | OE | Double Roller | Billet |
| Lifters | Hyd Roller | Hyd Roller | Tie Bar Hyd Roller |
| Iron Heads | New Springs | New Springs + Valves | New Springs + Valves |
| New Head Bolts | No | Yes | ARP |
| Warranty | 1 Year Basic | 1 Year Premium | 2 Year Ultimate |
