turn key sbc
Chevy Turn Key 427 434 SBC
Chevy Turn Key 427 434 Small block
sbc turn key

350 TURN KEY- 400HP – SBC – GM BASED

$17,000.00

Available on backorder

The billet steel 4 bolt main is for the 3 center main caps
This option adds blueprinting the block to exact factory specifications. This moves bore centers and decks to the blueprinted locations. This is automatically included with the aftermarket block.
Enter your custom paint code here.
Please select flex plate for automatic transmission and flywheel for manual transmissions.
If you need a specific tooth flywheel please enter that here. If not then leave blank.
Includes Schaeffer's break in oil and a Wix filter. This package comes with enough oil to fill the engine up when you get it and includes oil and a filter for your first oil change.
Product total
Options total
Grand total
Pay a deposit of 50% per item
Add to Wishlist
Compare
Categories: ,

Description

***CURRENT LEAD TIMES- REMAN BLOCK 2-3 MONTHS, NEW BLOCKS 2-6 MONTHS***

Please note factory 4 bolt main blocks may have a longer wait time than the billet steel 4 bolt main blocks.

400 Advertised horsepower but this engine typically makes more on our dyno.

Looking for a high quality Chevy 350 Turn Key Crate Engine, or 350 Small Block Chevy? Look no further than ours! Our Chevy 350 Turn Key Engines are designed with quality in mind, and include features that will provide you with an engine you can be proud of.

If you’re looking for a top quality short block or 350 Small Block Chevy for your Chevy project, then look no further than ours! Our kits are available with several different options to suit your needs. Our 350 Small Block Chevy and Chevy 350 Turn Key’s customization and included features that will provide you with an engine you can be proud of. We overbuild to provide you with the highest quality engine.

The Chevy 350 Turn Key  includes:

  • Seasoned GM 350 block- bored, decked, honed, lined hones, pressure tested for cracks, and cleaned. (optional blueprint machining)
  • 1 piece rear main seal block.
  • 4 coats of high quality ceramic engine paint. We have our engines professionally sprayed with a 2 part paint just like you would use on a car but a special high temp version. This is not a cheap “rattle can” paint job that will wear off. This is a show quality paint job!
  • Externally balanced to less than 2 grams.
  • Hypereutectic Speed Pro pistons.
  • Hastings premium moly rings.
  • Reman crankshaft and rods.
  • Brodix IK aluminum heads-
    • 64cc chamber
    • 2.02″ intake/1.60″ exhaust valves
    • 200cc intake
  • Comp Cams aluminum roller rockers.
  • Hydraulic roller camshaft – 218/228 @ .050″, .535″ lift.
  • Double roller timing chain
  • Performance bearings
  • Plasma Moly rings
  • Computerized balance
  • Built in house
  • All clearances set and provided on build sheet
  • Dyno Tested, Tuned and Dyno Sheet Included!
  • Compression Ratio- 10:1
  • Hardened pushrods
  • ARP head bolts
  • Edelbrock aluminum intake manifold.
  • 600 Holley/Quick Fuel carb with electric choke and vacuum secondary
  • Holley performance fuel pump
  • Stainless braided fuel line
  • Stainless steel bolt kit
  • Melling oil pump
  • New oil pan
  • New dipstick
  • Performance balancer
  • New timing cover
  • MSD RTR distributor
  • New water pump
  • NGK spark plugs
  • Phillips custom Wolverine racing plug wires – number and heat shield included
  • Thermostat and water neck
  • PCV system installed
  • GM Slant Edge Valve Covers and Air Cleaner with your choice of color
  • Incudes packaging and crating for shipping (shipping is extra)
  • No Core Charge
  • Requires 91 octane
  • Requires a minimum of a 1800 stall converter
  • Includes our 2 year Turn Key warranty
  • (shown with options)

 

Related products

X